Industrial marking systems for precision application of oil to plastic parts - Header - REA JET ST

REA JET One Dot System

Spray Mark Technology

The REA JET One Dot Systems (EDS) are particularly well suited to very fine dot and line markings. The dot size is configured by selecting the nozzle size and by varying the material pressure, and the stepless setting on the controller.

Gallery

Products and Applications

Product Details

  • Type REA JET EDS: dot marking, even with pigmented inks
  • Type REA JET EDS II: dot marking, heavy-duty version with IP65 protection class
  • Nozzles sizes for different dot size: 80, 130, 270, 350, 500 micron
  • Very fine dot and line markings at a thickness of 0.2 to 3 mm
  • for quality assurance you can mark products with a dot to be recognized as either good or bad (use automatic camera recognition)
  • colored line marking for pipes, profiles and endlessly manufactured products (e.g. extruded goods)
  • applying oils, separating agents, soaps or process water
  • welded seam marking in the manufacturing of metal profiles
  • applying fragrances to cosmetic samples
  • wide selection of reliable marking paints and solvents
  • inks based on alcohol, acetone, or MEK, as well as solvent-based paints and lacquers
  • special paints such as water-based lacquers, UV and fluorescent paints, adhesives based on water or solvents, resins, heat resistant paints and paints for hot surfaces, up to 1000 degrees Celsius
  • approved cleaners are available for each spray mark medium

You have questions?

Call us
+49 (0) 6154 - 638 0
Contact us
Quick contact form

Contact form

We would be glad to help you find the best coding and marking solution to fit your requirements.

* Mandatory field

Tech Talk

News posts

Plastic printing of pe foil - close up - REA JET ST

Printing on PE-foil

For visual identification of the different bristle diameters, the PE-plastic hoses are color coded according to the different bristle thicknesses.

 

Go to post Go to news
Coding of injection molded plastic parts - close up - REA JET ST

Injection molded plastic parts

Oil application with REA JET ST Spray Mark System to ease assembly of injection molded plastic parts. The oil also prevents any squeaking during screwing or unscrewing, and makes the pulling-off and secure attachment of the cap easier.

Go to post Go to news
Direct marking of finished tires - High point marking overview - REA JET ST

High Point Marking on finished tires

Vehicle tires on rims are balanced on the conveyor belt and are marked on both sides with 1 to 2 high-to mark the mounting position of the balance weights.

Go to post Go to news
contact
+49 (0) 6154 - 638 0

You have questions? We would be pleased to call you back.

* Mandatory field