Industrial marking systems for marking of steel wire - Header - REA JET ST

REA JET Spray Mark Heads

Spray Mark Technology

Modularly structured REA JET Spray Mark Heads can apply precise dots and lines to porous and non-porous surfaces. With extremely short cycle times of 20 ms, speeds of up to 100 m/min are easily possible. The dot size can be freely adjusted by controlling the material pressure, the notch setting on the spray mark head and the nozzle size used.

Wide area marking (e.g. primers) can be applied using spray mark heads with wide spray heads. Markings can be applied from above, below, and sideways.

Gallery

Products and Applications

Product Details

  • Type REA JET ST SR-1: mid-size model - dot, line and surface-marking for almost all media
  • Type REA JET ST SRM-1: mid-size model - dot, line and surface-marking for abrasive media
  • Type REA JET ST SR-5: small model - dot, line and surface-marking for almost all media
  • Type REA JET ST SR-7: smallest model - dot, line and surface-marking for almost all media
  • Nozzles sizes for different dot size: 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 mm
  • Dot and line marking at a thickness of 3 to 60 mm
  • multi-colored dot and line marking for product type differentiation
  • automated detectable line markings for edge trimming
  • application of location and position markings, as well as "bend here" or "cut here" markings
  • clear product differentiation with just one color using marking patterns (dot, line, combinations)
  • marking hot spots when producing insulation materials
  • targeted application of coolant, cutting media or lubricants
  • application of flux for automatic soldering processes
  • sealing with protective varnish, such as in circuit board production
  • targeted application of adhesives or screw seals
  • wide selection of reliable marking paints and solvents
  • Inks based on alcohol, acetone, or MEK, as well as solvent-based paints and lacquers
  • special paints such as water-based lacquers, UV and fluorescent paints, adhesives based on water or solvents, resins, heat resistant paints and paints for hot surfaces, up to 1000 degrees Celsius
  • approved cleaners are available for each spray mark medium

You have questions?

Call us
+36 30 237 8837
Contact us
Quick contact form

Contact form

We would be glad to help you find the best coding and marking solution to fit your requirements.

* Mandatory field

Tech Talk

News posts

Direct marking of finished tires - High point marking overview - REA JET ST

High Point Marking on finished tires

Vehicle tires on rims are balanced on the conveyor belt and are marked on both sides with 1 to 2 high-to mark the mounting position of the balance weights.

Go to post Go to news
Plastic printing of pe foil - close up - REA JET ST

Printing on PE-foil

For visual identification of the different bristle diameters, the PE-plastic hoses are color coded according to the different bristle thicknesses.

 

Go to post Go to news
Coding of injection molded plastic parts - close up - REA JET ST

Injection molded plastic parts

Oil application with REA JET ST Spray Mark System to ease assembly of injection molded plastic parts. The oil also prevents any squeaking during screwing or unscrewing, and makes the pulling-off and secure attachment of the cap easier.

Go to post Go to news
contact
+36 30 237 8837

You have questions? We would be pleased to call you back.

* Mandatory field